| |
Bergeon Tools
Browse our Bergeon Tools by selecting from one of the categories below.
If you have an immediate need for a particular tool, please call us at 1-800-537-0343 or email us at info@mccawcompany.com.
Oilers & Accesories
6885-CB
Assortment of 5 oil-cups on rotating stand
In wooden case.
Oil-cups in coloured synthetic-material.
With 5 oilers
No 30102-
. Sizes: 160 x 160 x 50 mm.
contact us to purchase > |
|
|
|
6885-G
Oil-cups
Coloured synthetic-material.
Ø 34 mm.
Tinged glass oil-cups Ø sink 6 - 12 mm.
Red
contact us to purchase > |
|
|
|
2718-1A
Automatic oilers
No 2A and No 12
Range of application:
Everywhere a carefully and
precise quantity of oil has to be deposited. Easy use. Inside the oiler, oil is protected against dust. Supplied on base.
For shock protection devices in watches and balance bearings of all kinds without removing cap jewel. Contents: 1000 mm3.
Example: Incabloc, Kif, setting-jewels, etc.
contact us to purchase > |
|
|
|
2719-2A
Automatic oilers
No 2A and No 12
Range of application: Everywhere a carefully and precise quantity of oil has to be deposited. Easy use. Inside the oiler, oil is protected against dust. Supplied on base.
Drop deposit oilers. For pallets, mechanical parts, oiling spots difficult to reach. The oiler No 12 is also recommended for the use of fluid grease.
contact us to purchase > |
|
|
|
2720-5
Automatic oilers
No 5 and No 15
Range of application: Everywhere a carefully and precise quantity of oil has to be deposited. Easy use. Inside the oiler, oil is protected against dust. Supplied on base.
Drop injection oilers. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil. The oiler No 15 is also recommended for the use of fluid grease.
contact us to purchase > |
|
|
|
4743-12
Automatic oilers
No 2A and No 12
Range of application: Everywhere a carefully and precise quantity of oil has to be deposited. Easy use. Inside the oiler, oil is protected against dust. Supplied on base.
Drop deposit oilers. For pallets, mechanical parts, oiling spots difficult to reach. The oiler No 12 is also recommended for the use of fluid grease.
contact us to purchase > |
|
|
|
Screwdrivers & Accessories
6899-A05
Assortment of 5 ergonomic screwdrivers
The new screwdriver
range’s tools combine technical quality and comfort
of use. The screwdrivers are provided with an elastomer
membrane which assures an ideal contact between the
tool and the hand, while the octagonal head enhances
the comfort.
Shank : Stainless steel.
Handle : TPE
elastomer coat.
Head : Self-lubricating, synthetic
POM (Delrin) material.
Blades : Hardened stainless
steel.
contact us to purchase > |
|
|
|
30009
Assortments of
BERGEON screwdrivers
Assortment of 9 screwdrivers
with spare blades in grey plastic tubes.
In wooden case
First quality.
Chromium-plated
Contents Ø 0.50 - 0.60 - 0.80 - 1.00 - 1.20 - 1.40 - 1.60 - 2.00 - 2.50 mm.
contact us to purchase > |
|
|
|
2868
Assortments of BERGEON screwdrivers
Assortment of 5 screwdrivers with
1 spare blade per
diameter.
In cardboard box
First quality.
Chromium-plated
ContentsØ
0.50 - 0.60 - 0.80 - 1.00 - 1.20 mm.
contact us to purchase > |
|
|
|
5970
Rotating stand with
9 screwdrivers
BERGEON No 5970
First quality.
Rotating stand
Ø 65 mm.
Good presentation; with hole with coloured
marks for each spare blade. Very stable stand with
adherent rubber plate.
Contents:
9 chromed BERGEON screwdrivers
No 30080 of first quality.
Ø 0.50 - 0.60 - 0.80 - 1.00 - 1.20 - 1.40 - 1.60 - 2.00 - 2.50 mm.
9 spare blades.
contact us to purchase > |
|
|
|
6899
Set of 10 ergonomic watchmakers screwdrivers
The new screwdriver range’s tools combine technical
quality and comfort of use. The screwdrivers are provided
with an elastomer membran which assures an ideal contact
between the tool and the hand, while the octagonal
head enhances the comfort.
Shank: Stainless steel.
Handle: TPE elastomer coat.
Head: Self-lubricating,
synthetic POM (Delrin) material.
Blades: Hardened stainless steel.
Rotating base Ø 90 mm. Includes
emplacements for 10 screwdrivers and 10 exchange-blade
tubes.
Content:
10 BERGEON screwdrivers Nr. 6899-...
Ø 0.50
- 0.60 - 0.80 - 1.00 - 1.20 - 1.40 - 1.60 - 2.00 -
2.50 - 3.00 mm.
With exchange 2 blades in grey
plastic tubes.
contact us to purchase > |
|
|
|
Broaches & Reamers
3008
Assortment of 12 pivot cutting broaches with PVC handle
Ø 0.05 - 0.20 mm. 2 pieces per size.
contact us to purchase > |
|
|
|
Bur Sets
30008
Assortment of 24 burs for jewelers
In tool steel. Fine cut. First quality. Shank: Ø 2.35 mm.
Total length: 44.5 mm. Burs Ø 3 - 4- 6 mm.
Contents: No 6275 A - HH - N - NN - P - Q - RR - S.
contact us to purchase > |
|
|
|
Case Openers & accessories
4755
Watch case opener
In lever form
for lifting backs of 3 pieces watch cases
Lever width 5 mm. Length: 110 mm.
contact us to purchase > |
|
|
|
5537
Key for opening and closing waterproof and grooved watch-cases
Supplied: with 6 grooved chucks.
contact us to purchase > |
|
|
|
2533
Rubber key for opening and closing cases of waterproof watches
This key will not open all cases, but it will nevertheless render valuable service.
contact us to purchase > |
|
|
|
2819-4
Key for opening
waterproof cases
On plastic base.
In cardboard box.
Chucks contents in the box:
- 3 for polygonal cases
- 3 for slotted cases
- 3 for cases with holes
- 3 for cases grooved.
Vices, see pages No 7006 A - D.
contact us to purchase > |
|
|
|
5700-RO
BERGEON device for opening and closing grooved watch cases
Total height: 300 mm.
Diameter of wheel: 160 mm.
Made of die-cast alloy.
Contents:
" 1 vice No 5674.
" 1 set of 6 rings No 5538 with
intermediate holder.
" 2 sleeper screws.
" 2 wing nuts.
All accessories of vice No 5700 on pages No 7004 R to No 7004 T can be fitted on this case opener.
contact us to purchase > |
|
|
|
Waterproof Testers
5555/98
Apparatus for testing the water resistance of watch cases
Air pressure system.
The advantages offered by this pressure apparatus are due to
the fact that a watch can be
rested under normal conditions of wear.
Testing up to 3 atm.
(Security up to 6 atm.).
Cast base.
Robust, very stable.
Cylinder int. Ø : 62 mm.
Capacity: 2 watches
Dimensions: 245 x 150 x 290 mm.
contact us to purchase > |
|
|
|
Mainspring Winders
5355
Assortments of winders for
Nivaflex
mainsprings and other qualities of steel
Assortment of 7 mainspring winders for left hand and right hand mainsprings
Contents: 7 mainspring winders for right hand No 0 - 6 and 1 handle.
7 arbors for left hand No 0 - 6 and 1 handle. In wooden case.
Red point: on right
Blue point: on left
contact us to purchase > |
|
|
|
Pin Vises
30432
Holder with slide
locking steel jaws
Nickel-plated brass handle.
Steel chuck. Opening: 0 - 1.5 mm.
Length: 110 mm.
contact us to purchase > |
|
|
|
Removers
5285-290
Punches-Bergeon
Ø 4.7 mm
available separately
Can also be used with other types of staking tools.
For removing screws
contact us to purchase > |
|
|
|
6745-GS
Assortment of 6 pins
Ø 0.40 - 0.60 - 0.80 - 1.00 - 1.50 -2.00 mm. On wooden base. To be used with press, No 6745-100,
No 6745.
Used with bracelet pin remover
contact us to purchase > |
|
|
|
30496
Rust remover
Bottle of 50 gr.
Instruction for use: leave the movement in the bath for about two minutes; then rinse with water and dry immediately. For small parts, wet a piece of pegwood and rub the spot of rust. Never dry the movement without having rinsed it.
contact us to purchase > |
|
|
|
30636-1
"Presto" tools
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. Hand remover for wrist watches, tips will not damage the dial. Black handle
contact us to purchase > |
|
|
|
30637-2
"Presto" tools
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing
cannon pinions and hands of large watches, stronger.
Green handle
contact us to purchase > |
|
|
|
4503-0050
Product for extracting broken screws
VISSIN
Simple and rapid.
Remplaces all mechanical
processes.
contact us to purchase > |
|
|
|
Buffs & Abrasive Wheels
6788
SELVYT and SELVYT-SR
polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
contact us to purchase > |
|
|
|
6168-D
Silicium carbide
supple wheels
ARTIFEX
For gringing, polishing, satining. For all precious metals.
Ø: 100 mm. Thickness: 20 mm. Hole: Ø 25 mm.
delivered with a mobile reducer hole Ø : 10 mm.
Max. speed rotation: 1900 r.p.m.
Rough
contact us to purchase > |
|
|
|
6168-E
Silicium carbide
supple wheels
ARTIFEX
For gringing, polishing, satining. For all precious metals.
Ø: 100 mm. Thickness: 20 mm. Hole: Ø 25 mm.
delivered with a mobile reducer hole Ø : 10 mm.
Max. speed rotation: 1900 r.p.m.
Semi-rough
contact us to purchase > |
|
|
|
6168-G
Silicium carbide
supple wheels
ARTIFEX
For gringing, polishing, satining. For all precious metals.
Ø: 100 mm. Thickness: 20 mm. Hole: Ø 25 mm.
delivered with a mobile reducer hole Ø : 10 mm.
Max. speed rotation: 1900 r.p.m.
Very fine
contact us to purchase > |
|
|
|
6085-E1
Circular abrasive brushes with
radial leaves
Silicium carbide: S.
Colour: grey-green. Marked satin metal finish, slightly mat.
Aluminium oxide: A.
Colour: red brown. Fine satin metal finish, shining.
The brushes can be used for
retouching of old objects, cleaning, de-oxidation, stripping. To be used without polishing products or paste.
Ø: 100 mm. Thickness: 20 mm. Hole: Ø 6 mm.
Suggested rotation speed:
2800 r/min.
Maximum rotation speed:
5500 r/min.
contact us to purchase > |
|
|
|
6085-E2
Circular abrasive brushes with radial leaves
Silicium carbide: S.
Colour: grey-green. Marked satin metal finish, slightly mat.
Aluminium oxide: A.
Colour: red brown. Fine satin metal finish, shining.
The brushes can be used for
retouching of old objects, cleaning, de-oxidation, stripping. To be used without polishing products or paste.
Ø: 100 mm. Thickness: 20 mm. Hole: Ø 6 mm.
Suggested rotation speed:
2800 r/min.
Maximum rotation speed:
5500 r/min.
contact us to purchase > |
|
|
|
6085-E3
Circular abrasive brushes with radial leaves
Silicium carbide: S.
Colour: grey-green. Marked satin metal finish, slightly mat.
Aluminium oxide: A.
Colour: red brown. Fine satin metal finish, shining.
The brushes can be used for
retouching of old objects, cleaning, de-oxidation, stripping. To be used without polishing products or paste.
Ø: 100 mm. Thickness: 20 mm. Hole: Ø 6 mm.
Suggested rotation speed:
2800 r/min.
Maximum rotation speed:
5500 r/min.
contact us to purchase > |
|
|
|
Watch Winders
5803-110
Machines for testing FINAL-TEST
- For testing the working of watches - For winding automatic watches - For checking mechanical parts of quartz watches, especially the calendar mechanism
Can be used in horizontal or vertical position. For 6 watches with
bracelets. Gent's watches without bracelet can be fixed by the spring bars. For watches without bracelets, see also accessory No 5802-C.
Dimensions diam. 260 x 120 mm.
1 revolution per minute
contact us to purchase > |
|
|
|
Springbar Tools & Accessories
Luminous Compounds
5680
Luminous paste non-radioactive
Dilute with water. Contents: 2 gr.
Available in:
White, green, and yellow
contact us to purchase > |
|
|
|
Movement Holders
4040
Extensible and reversible movement holder
For calibres 8 3/4''' - 19'''.
Nickelled and sanded.
contact us to purchase > |
|
|
|
Loupe Holders
6855-E-5.0
Wooden Loupes
Diverses essences : Boxwood (A),
Planetree (B), Peartree (C), Iroko (D),
Padouk (E), Kotibe (F), Bubinga (G),
Wengue (H), Oliver (J).
Embellishment ring of brass.
2 differents versions:
Brilliant ring No 6855
Satining ring No 6856
Magnification: 2.5 - 2.8 - 3.3 - 4 - 5 -
6.7.
Personalized inscription by laser .
When ordering: please indicate
kind of wood and magnification.
Other executions upon request.
Brilliant ring
contact us to purchase > |
|
|
|
Miscellaneous
6033
RODICO - ORIGINAL
For cleaning balance pivots, train wheel pivots, removing finger prints and stains from plates, bridges, dials, hands; removing excess oil from watch jewels and taking out broken pivots from the jewels.
contact us to purchase > |
|
|
|
6496
Cutter for milanais and
polonais bracelets
Cutting width: 22 mm.
Very neat cutting.
Total length : 240 mm.
Locking system.
contact us to purchase > |
|
|
|
6808-5
Bench top
Self-adhesive green plastic sheets.
Always stays flat and doesn't slide.
Dim. 320 x 240 x 0.6 mm. Weight Pocket of 5 sheets
370 gr
contact us to purchase > |
|
|
|
|
